Installing OpenStack Octavia LBaaS with RHOSP in Tungsten Fabric

date

2020-06-08

Tungsten Fabric Release 2005 supports Octavia as LBaaS. The deployment supports RHOSP and Juju platforms.

With Octavia as LBaaS, Tungsten Fabric is only maintaining network connectivity and is not involved in any load balancing functions.

For each OpenStack load balancer creation, Octavia launches a VM known as amphora VM. The VM starts the HAPROXY when listener is created for the load balancer in OpenStack. Whenever the load balancer gets updated in OpenStack, amphora VM updates the running HAPROXY configuration. The amphora VM is deleted on deleting the load balancer.

Tungsten Fabric provides connectivity to amphora VM interfaces. Amphora VM has two interfaces; one for management and the other for data. The management interface is used by the Octavia services for the management communication. Since, Octavia services are running in the underlay network and amphora VM is running in the overlay network, SDN gateway is needed to reach the overlay network. The data interface is used for load balancing.

Follow the procedure to install OpenStack Octavia LBaaS with tungsten Fabric:

  1. Deploy RHOSP13 with Tungsten Fabric without Octavia.

    openstack overcloud deploy --templates tripleo-heat-templates/ \--roles-file tripleo-heat-templates/roles_data_contrail_aio.yaml \-e environment-rhel-registration.yaml \-e tripleo-heat-templates/extraconfig/pre_deploy/rhel-registration/rhel-registration-resource-registry.yaml \-e tripleo-heat-templates/environments/contrail/contrail-services.yaml \-e tripleo-heat-templates/environments/contrail/contrail-net-single.yaml \-e tripleo-heat-templates/environments/contrail/contrail-plugins.yaml \-e misc_opts.yaml \-e contrail-parameters.yaml \-e docker_registry.yaml

  2. Make a copy of tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.yaml file.

    cp tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.yaml tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.bak

  3. Make the following changes in generate_certs section of the tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.yaml file.

    conditions:
    
      generate_certs:
          and:
          - get_param: OctaviaGenerateCerts
          - or:
            - equals:
              - get_param: StackAction
              - CREATE
            - equals:
              - get_param: StackAction
              - UPDATE
    
  4. Deploy RHOSP13 with Octavia services.

    openstack overcloud deploy --templates tripleo-heat-templates/ \ --roles-file tripleo-heat-templates/roles_data_contrail_aio.yaml \-e environment-rhel-registration.yaml \-e tripleo-heat-templates/extraconfig/pre_deploy/rhel-registration/rhel-registration-resource-registry.yaml \-e tripleo-heat-templates/environments/contrail/contrail-services.yaml \-e tripleo-heat-templates/environments/contrail/contrail-net-single.yaml \-e tripleo-heat-templates/environments/contrail/contrail-plugins.yaml \-e tripleo-heat-templates/environments/services/octavia.yaml \-e misc_opts.yaml \-e contrail-parameters.yaml \-e docker_registry.yaml

  5. Rollback changes in tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.yaml file.

    cp tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.bak tripleo-heat-templates/docker/services/octavia/octavia-deployment-config.yaml

Here is an example for creating and testing load balancer:

Prerequisites:

  • You must have connectivity between Octavia controller and amphora instances,

  • You must have OpenStack services into LXD containers.

  • You must have separate interfaces for control plane and data plane.

  1. Create private network.

    openstack network create privateopenstack subnet create private --network private --subnet-range 10.10.10.0/24 --allocation-poolstart=10.10.10.50,end=10.10.10.70 --gateway none

  2. Create security group.

    openstack security group create allow_allopenstack security group rule create --ingress --protocol any --prefix '0.0.0.0/0' allow_all

  3. Check available flavors and images. You can create them, if needed.

    openstack flavor listopenstack image list

  4. Create two servers for load balancer.

    openstack server create --flavor test_flavor --image cirros --security-group allow_all --network private cirros1openstack server create --flavor test_flavor --image cirros --security-group allow_all --network private cirros2

  5. Create additional server to test load balancer.

    openstack server create --flavor test_flavor --image cirros --security-group allow_all --network private cirros-test

  6. Check status and IP addresses.

    openstack server list --long

  7. Create simple HTTP server on every cirros. Login on both the cirros instances and run following commands:

    MYIP=$(ifconfig eth0|grep 'inet addr'|awk -F: '{print $2}'| awk '{print $1}') while true; do echo -e "HTTP/1.0 200 OK\r\n\r\nWelcome to $MYIP" | sudo nc -l -p 80 ; done&

  8. Create load balancer

    openstack loadbalancer create --name lb1 --vip-subnet-id private

    Make sure provisioning_status is Active.

    openstack loadbalancer show lb1

  9. Setup load balancer

    openstack loadbalancer listener create --protocol HTTP --protocol-port 80 --name listener1 lb1openstack loadbalancer show lb1  # Wait for the provisioning_status to be ACTIVE.openstack loadbalancer pool create --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP --name pool1openstack loadbalancer healthmonitor create --delay 5 --timeout 2 --max-retries 1 --type HTTP pool1openstack loadbalancer member create --subnet-id private --address 10.10.10.50 --protocol-port 80 pool1openstack loadbalancer member create --subnet-id private --address 10.10.10.51 --protocol-port 80 pool1 IP addresses 10.10.10.50 and 10.10.10.51 belong to VMs created with test http server in step 7.

  10. Check the status of load balancer.

    openstack loadbalancer show lb1  # Wait for the provisioning_status to be ACTIVE. openstack loadbalancer pool listopenstack loadbalancer pool show pool1openstack loadbalancer member list pool1openstack loadbalancer listener list

  11. Login to load balancer client and verify if round robin works.

    cirros@169.x.0.9's password:$ curl 10.10.10.50Welcome to 10.10.10.52$ curl 10.10.10.50Welcome to 10.10.10.53$ curl 10.10.10.50Welcome to 10.10.10.52$ curl 10.10.10.50Welcome to 10.10.10.53$ curl 10.10.10.50Welcome to 10.10.10.52$ curl 10.10.10.50Welcome to 10.10.10.53

Release History Table

Release

Description

2005

Tungsten Fabric Release 2005 supports Octavia as LBaaS.